|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SEMiX141KT16s Absolute Maximum Ratings Symbol Chip IT(AV) ITSM i2t sinus 180 10 ms 10 ms Tc = 85 C Tc = 100 C Tj = 25 C Tj = 130 C Tj = 25 C Tj = 130 C 140 105 3400 3000 57800 45000 1700 1600 1600 Tj = 130 C Tj = 130 C 200 1000 -40 ... 130 -40 ... 125 AC sinus 50Hz 1 min 1s 4000 4800 A A A A A2s A2s V V V A/s V/s C C V V Conditions Values Unit SEMiX 1s (R) VRSM VRRM VDRM (di/dt)cr Rectifier Thyristor Module SEMiX141KT16s (dv/dt)cr Tj Module Tstg Features * Terminal height 17 mm * Chips soldered directly to isolated substrate Visol Characteristics Symbol Chip VT VT(TO) rT IDD;IRD tgd tgr tq IH IL VGT IGT VGD IGD Rth(j-c) Rth(j-c) Rth(j-c) Module Rth(c-s) Ms Mt a w 145 per chip per module to heat sink (M5) to terminals (M6) 3 2.5 0.075 5 5 5 * 9,81 K/W K/W Nm Nm m/s2 g Tj = 25 C, IT = 360 A Tj = 130 C Tj = 130 C Tj = 130 C, VDD = VDRM; VRD = VRRM Tj = 25 C, IG = 1 A, diG/dt = 1 A/s VD = 0.67 * VDRM Tj = 130 C Tj = 25 C Tj = 25 C, RG = 33 Tj = 25 C, d.c. Tj = 25 C, d.c. Tj = 130 C, d.c. Tj = 130 C, d.c. per thyristor per module sin. 180 per thyristor per module per thyristor per module 0.21 2 150 0.25 10 1 2 120 100 200 300 500 1.65 0.85 2.1 60 V V m mA s s s mA mA V mA V mA K/W K/W K/W K/W K/W K/W Typical Applications* * Input Bridge Rectifier for AC/DC motor control * Power supply Conditions min. typ. max. Unit KT (c) by SEMIKRON Rev. 14 - 25.03.2010 1 SEMiX141KT16s Fig. 1L: Power dissipation per thyristor/diode vs. on-state current Fig. 1R: Power dissipation per thyristor/diode vs. ambient temperature Fig. 2L: Power dissipation of one module vs. rms current Fig. 2R: Power dissipation of one module vs. case temperature Fig. 3L: Power dissipation of two modules vs. direct current Fig. 3R: Power dissipation of two modules vs. case temperature 2 Rev. 14 - 25.03.2010 (c) by SEMIKRON SEMiX141KT16s Fig. 4L: Power dissipation of three modules vs. direct current Fig. 4R: Power dissipation of three modules vs. case temperature Fig. 5: Recovered charge vs. current decrease Fig. 6: Transient thermal impedance vs. time Fig. 7: On-state characteristics Fig. 8: Surge overload current vs. time (c) by SEMIKRON Rev. 14 - 25.03.2010 3 SEMiX141KT16s Fig. 9: Gate trigger characteristics spring configuration SEMiX 1s This is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX * The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our personal. 4 Rev. 14 - 25.03.2010 (c) by SEMIKRON |
Price & Availability of SEMIX141KT16S10 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |